Raise3D's Genuine replacement Toughened nozzle to suit the E2, Pro2 and Pro2 Plus
Selected Nozzle Diameter - 0.4mm
Replacement / Spare toughened nozzle for Raise3D E2 and Pro2 Series 3D Printers Only.
0.4mm is the standard nozzle used when printing most filament types. A larger nozzle can be used to improve speed and reduce printing time while finer are ideal to print finer details.
IMPORTANT: You MUST heat up the nozzle (by performing the Withdraw function) before you remove the previous nozzle to install the new nozzle. If you do not heat it up, you will damage the extruder assembly it is attached to!
*Please note any 3D Printer and Hot End specifications can be subject to change without notice. Additionally if you have changed or upgrade the hardware of your 3D printer, the nozzle type you need may be different.
Click the 'Specifications and Installation' for details about the nozzle.
You MUST heat up the nozzle installed in your printer before you remove it and install your new nozzle. If you do not heat it up, you will damage components in the extruder assembly it is attached to!
3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.
Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.
Dont know where to start? Or which filament will suit your application?
We have a broad range of support options including Telephone Support