Polymaker PolyMide PA6-GF Grey Nylon 1.75mm 2kg

Glass fiber filled Nylon 6 / Manufactured with Polymakers Warp-Free™ and Fiber-Adhesion™ technology

Sold Out - Pre-Order for next Shipment

AUD ($255.00 Incl Gst) $231.82 Ex Gst
Add to cart Buy now Add to wish list

PolyMide PA6-GF

PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyMide™ PA6-GF is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.

We highly recommend to use a wear resistant nozzle, to print with the PolyBox™ and to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.

PolyMide™ PA6-GF features Fiber Adhesion™ and Warp-free™ technology

Warp-Free™ - Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behaviour of Nylon, which enables the material to fully release the internal stress before solidification.

Fiber Adhesion™ - Fiber Adhesion™ technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the matrix. This results in better strength along the Z-axis and reduced mechanical anisotropy.

Click the 'Quality & Technologies' tab to learn more about this technology.

Polymaker PolyMide PA6-GF

FEATUREs

Excellent Stiffness & Toughness - Featuring a tensile modulus of 4.4 GPA on the XY axis and 3.3 GPA on the Z axis, PolyMide™ PA6-GF is well suited for high performance industrial and engineering applications. PolyMide™ PA6-GF combines excellent stiffness and toughness. 

Excellent Heat Resistance - Featuring a heat deflection temperature of up to 191°C, PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.

Outstanding Layer Adhesion - All other brands of fiber reinforced material show a decrease in z-axis layer adhesion when compared with their non-fiber reinforced Nylons, producing a part that is only stronger on the X-Y axis but detrimental to the Z axis. Polymakers new technology in PolyMide™ PA6-GF not only solves this problem but actually increases Z axis tensile strength creating more isotropic parts that are strong in every direction.

Wear Resistant and strong - Parts printed in PolyMide™ PA6-GF display excellent strength and wear resistant properties.

Improved Printability – Unlike many other Nylon filaments, PolyMide™ PA6-GF is extremely easy to work with, exhibiting excellent dimensional stability. It is compatible with most filament-based 3D printers with no heated bed or chamber required!

Uncompromised Quality - Polymakers leading quality control process and rigorous in-house testing ensure reliable printing and consistency across spools and batches.

Polymaker Industrial Resellers

To learn more about PolyMide™ PA6-GF, click the "Why people are using it", "Quality & Technologies" and "Settings & Specifications" tabs.

PolyMide PA6-GF 3D Printing Filament

Nylon also known as Polyamide (PA) is one of the most popular engineering grade plastics used across a wide range of industries. Nylon 6 is an excellent matrix material for composites like glass fiber which enhance stiffness, strength and heat resistance.

PolyMide PA6 Glass Fiber Filament

When compared to other Nylon 6 glass fiber filaments, PolyMide™ PA6-GF offers some significant advantages.

  • Excellent stiffness, strength, toughness and wear resistance.
  • Excellent heat resistance (191°C).
  • Outstanding layer adhesion (Fiber Adhesion™ technology)
  • Outstanding dimensional stability when compared to other Nylon materials (Warp-Free™ technology)

PolyMide PA6-GF Spool
Glass fiber reinforcement provides significant stiffness, tensile strength and improved layer ahdesion with Polymakers Fiber adhesion™ technology.

Glass fiber filled nylon materials suffer from poor layer-adhesion; losing up to 35% of their z axis tensile strength when compared with unreinforced nylon. To solve this issue, Polymaker exclusively developed their Fiber adhesion™ technology, which optimizes the surface chemistry of the fibers to achieve better dispersion and bonding to Nylon 6, resulting in improved layer adhesion when compared to unreinforced nylon.

PolyMide PA6-GF filament

Bracket 3D printed in PolyMide™ PA6-GF

Combined with Polymakers Warp-free™ technology, manufacturers can reliably print more isotropic and dimensionally accurate parts with PolyMide™ PA6-GF without a heated bed or chamber.

The glass fiber reinforcement provides significantly improved stiffness, toughness, strength and heat resistance without affecting z-axis layer adhesion. Featuring a heat deflection temperature of up to 191°C, this material lends itself perfectly to research, aerospace, automotive, and manufacturing industries where strength and heat resistance are required.

PolyMide PA6-GF Filament
HP Star scientists utilize PolyMide™ PA6-GF for custom cryo boxes.

HP Star is a high-pressure research laboratory investigating environments that mimic conditions found at the core of our solar system’s largest planets.

PolyMide™ PA6-GF has been used to create cryo boxes which study elements at extremely cold temperatures. These cryo boxes are used for cryogenically cooling the diamond tips until they’re cold enough to condense samples on, either as a solid or a liquid depending on the specimen element. This allows high-pressure research experiments on solid chlorine, hydrogen sulfide, and other high-temperature superconductors. This research gives insight into the atmospheric conditions experienced by our solar system’s gas giants.

We’ve been pouring liquid nitrogen straight into the 3D printed cryo boxes to rapidly cool our cells, we’ve experienced some non-fiber reinforced filaments crack under the heat shock, the PA6-GF performs very well when subject to these conditions.– Dr. Dallday-Simpson

PolyMide™ PA6-GF also interfaces perfectly with Polymakers soluble support material PolyDissolve™ S1 for printing complex geometry. PolyDissolve™ S1 is engineered to bond with a wide variety of filament types from Polymakers portfolio and printed supports dissolve in regular tap water.

Polymaker Filament

Polymaker is an international team passionate about 3D printing. They produce the very best 3D printing materials by controlling every stage of production. With a diverse portfolio of materials ranging from high performance plastics to unique aesthetic solutions, Polymaker will continue to add cutting edge materials to its ever-growing portfolio.

At the core of Polymaker is their research & development laboratory, this is where all Polymakers materials are formulated and fine-tuned from the ground up to create the best in class 3D printing materials. Our precision testing equipment combines the latest advancements in technology to ensure they are ahead of the game.


Technologies

Warp-Free™ technology

Polymaker Warp-Free Technology

Nylon is one of the most popular engineering materials in the manufacturing world, its excellent mechanical and thermal properties has helped Nylon infiltrate a variety of industries. In the additive manufacturing world, Nylon materials haven’t been as popular as they have a tendency to warp when 3D Printed. Warping is a common issue when printing higher temperature filaments (ABS, PC) without the right temperature requirements however unlike ABS and PC, the reason Nylon warps is related to crystallization behavior and thus the warping is not easily controlled or prevented with printer settings / heated environments.

To combat this effect Polymaker have developed Warp-Free™ technology. The secret behind this technology is the fine controlling of the materials microstructure and the crystallization behaviour of the polymer chains. This effect results in all the internal stress that’s caused when printing to be fully released before solidification. This allows users to print on a cold bed; creating a printed part with superior flatness.

Please note this technology works best with minimal bed temperatures, Polymaker have developed the Warp-Free™ technology so users can effectively print with improved reliability without requiring an industrial 3D printer. Printing PolyMide™ PA6-CF with a high temperature heated bed or heated chamber is not recommended as the kinetic energy will cause parts to crystallize faster during printing, circumventing the technology and sometimes resulting in warping.

Warp-Free™ technology

Fiber Adhesion TechnologyFiber Adhesion™ Technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the polyamide matrix. This results in better strength along the Z-axis and reduced mechanical anisotropy when compared to a pure Nylon PA6 printed parts. This in-house technology was developed exclusively to combat the problem of adding fibers to filaments. All other brand fiber reinforced materials show a decrease in z-axis layer adhesion when compared with their non-fiber reinforced Nylons producing a part that is only stronger on the X-Y axis but detrimental to the Z axis. Polymaker’s new technology not only solves this problem but actually increases Z axis tensile strength creating more isotropic parts that are strong in every direction.

 


Industry Leading Quality Control

Polymaker 3D Printing Filament

PolyMide™ PA6-GF like all other Polymaker materials is manufactured using state-of-the-art polymer processing technologies and equipment. Polymakers rigorous quality control process ensures industrial standards of reliability for a consistent customer experience.

Tolerance: Polymakers custom developed extrusion, control and monitoring solutions ensure filament tolerance and roundness meet Polymakers strict quality standards.
Reliable Mechanical, Colouring & Printing Properties: Every batch of filament products are tested to ensure all quality specs (melt flow, softening point, mechanical, diameter, round-ness) are met.
Drying & Vacuum Sealing: Before packaging, PolyMide™ PA6-GF is dried to a moisture level <0.05w%  to ensure the best printing quality and filaments are vacuum sealed to protect the filament from moisture. All vacuum packaged products are left for 24 hours before boxing to ensure they are leak-free.


Packaging

Polymaker PolyMide PA6-CF Filament

Resealable Aluminium Foil Bag: PolyMide™ PA6-GF is packaged in a vacuum sealed aluminium foil to ensure your filament is moisture free. Like all other Nylon based filaments, PolyMide™ PA6-GF is hygroscopic so we recommend keeping this bag for filament storage. 


Printing Settings
Nozzle Temperature 280˚C - 300˚C *
Build surface treatment Almost any surface with a thin coat of PVA glue
Build plate temperature 25˚C – 50˚C (Do NOT exceed 50 ˚C)
Cooling fan Turned off
Printing speed 60mm/s
Recommended support material (optional) PolyDissolve™ S1

* We highly recommend to use a wear resistant nozzle. Brass nozzles give a better thermal conductivity than hardened nozzles such as stainless steel so depending on your 3D printer, printing with extrusion temperatures closer to 300°C may be required when using specialty nozzles to ensure the correct extrusion temperature is achieved.

Note: Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
We recommend that the material be used with the PolyBox™ to keep the filament at dry conditions (relative humidity of 15% or less) to maintain the best printing results.


Annealing Settings

PolyMide™ PA6-GF printed parts can be annealed in an oven after printing to maximize mechanical performance and heat resistance.

Time 2 Hours
Temperature (˚C) 90˚C

In some rare cases with fine or thin geometries, different annealing instructions or design considerations may be required for the best results.


Specification
Net Weight 2kg
Diameter 1.75 mm
Density 1.2 g/cm3
Technologies Fiber Adhesion™ and Warp-Free™ Technology

Technical Data 

Mechanical Properties (DRY STATE)
Young’s modulus (X-Y):
4431 ± 184 (MPa)
Young’s modulus (Z): 3330 ± 145 (MPa)
Tensile strength (X-Y): 84.5 ± 2.1 (MPa)
Tensile strength (Z): 61.4 ± 3.9 (MPa)
Bending strength (X-Y): 136.4 ± 1.6 (MPa)
Charpy impact strength (X-Y): 16.5 ± 0.5 (kJ/m2)

Mechanical Properties (MOISTURE CONDITIONED)
Young’s modulus (X-Y):
2050.3 ± 243.6 (MPa)
Young’s modulus (Z): 2593 ± 192 (MPa)
Tensile strength (X-Y): 50.8 ± 4.9 (MPa)
Tensile strength (Z): 44.4 ± 4.7 (MPa)
Bending strength (X-Y): 65.1 ± 2.2 (MPa)
Charpy impact strength (X-Y): 21.2 ± 1.1 (kJ/m2)

Thermal Properties
Heat Deflection Temperature (ISO 75 0.45 MPa):
 191 ˚C
Heat Deflection Temperature (ISO 75 1.8 MPa): 124 ˚C
Melting Temperature: 215 °C

Note: All specimens were annealed prior to testing.

We have full safety data sheets and technical data sheets for PolyMide™ PA6-GF and all other Polymaker products. Contact us to enquire!

The typical values presented in Polymakers data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.


Compatibility

PolyMide™ PA6-GF has been engineered so users can print strong glass fiber filled parts with excellent layer-adhesion. As the glass fiber in this material is highly abrasive we recommend customers first check that their 3D printer is equipped to print abrasive materials before purchasing this product.

Aside from wear resistance, there are a few important considerations for this material that we recommend.

Reinforced filaments tend to be much stiffer than other standard filaments and this can cause problems when passing the filament through a printer’s feeding system. For a steady and uninterrupted flow of filament, it is recommended to take extra care and make sure your filament guide system is smooth and with minimal bends. Brass nozzles give a better thermal conductivity than hardened nozzles such as stainless steel. Depending on your 3D printer, printing with extrusion temperatures closer to 300°C may be required when using specialty nozzles to ensure the correct extrusion temperature is achieved.

Of course with thousands of unique 3d printer models on the market, we can't guarantee each filament type will work with every 3D printer.


FAQ

Q: Can I print this material without wear resistant hardware (nozzle etc.)?
A:  PolyMide™ PA6-GF contains 25% chopped glass fibers by weight which makes it very abrasive. It is important to have an abrasion resistant nozzle. It is important to have an abrasion resistant nozzle and hardware when printing this material. PolyMide™ PA6-GF can easily damage a brass nozzle after a few hundred grams of printing. Hardened nozzles are more expensive than regular brass nozzle so it is important to consider the amount of materials planned to be used. For some users it may be more cost effective to destroy one nozzle for some prints, but users are responsible for all 'wear and tear'.

Q: How well does Polymakers Warp-Free™ technology perform?
A:  With Polymakers Warp-Free technology, more users can effectively print Carbon-fiber nylon with better dimensional stability than comparative nylon products. This technology works best when printing with low bed/chamber temperatures. Because the warping behavior of Nylon materials is partially related to its crystallization rate while printing. If a user does print with a high temperature heated bed or chamber, the heat will increase the crystallization rate and cause a part to warp.

Q: Is annealing PolyMide PA6-GF required?
A: After printing, annealing PolyMide™ PA6-CG prints will ensure the highest degree of crystallinity. This is a recommended step as it allows end users to get the best properties and performance from their parts. PolyMide™ PA6-GF can be annealed in a convection oven at 90˚C for 2 hours. Of course annealing may not be required for applications that don't require the best thermal or mechanical properties. In some rare cases with fine or thin geometries, different annealing instructions or design considerations may be required for the best results.

Q: Will this material absorb moisture?
A:  Yes, Polyamides are hygroscopic, meaning that they absorb moisture from the air. We recommend keeping PolyMide™ PA6-GF dry as moisture can significantly reduce mechanical properties and cause print defects such as oozing and poor surface quality. To manage moisture absorption in your filaments, it is recommended to use the PolyBox™ which provides a stable, low level humidity storage solution for filaments during and in-between printing. If PolyMide™ PA6-GF appears to have absorbed too much moisture, they can be dried in a preheated convection oven for 12 hours at 80˚C.

Q: What support materials can I use with this product?
A:  Polymaker’s PolyDissolve™ S1 filament is the recommended support filament for PolyMide™ PA6-GF. If support material is required for a print, it is recommended to monitor print settings and quality for oozing and stringing; as this can dramatically affect the mechanical properties of the print. Self-support can also be used however, it is important to remove the support structures straight after printing, as prolonged exposure to atmospheric humidity can cause the support to strongly adhere to the printed part.

Don't know where to start? Or which filament will suit your application? We have a broad range of support options including telephone support. Contact us today!

Polymaker Industrial Resellers

We are authorized to supply and support Polymakers industrial range of products.

3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.

Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.

Key Benefits

  • Australian owned online and retail store operated since 2013.
  • Quality assured products.
  • Free shipping on orders over $150 across Australia* (* Excludes select products where noted and delivery to some remote regions.)
  • Certified Polymaker Industrial resellers.
  • We have hands on experience using Polymakers professional and industrial range of products. Phone, email and local support handled by our trained and knowledgeable staff.
  • Growing list of online resources for beginners and advanced users.
  • Support and warranty handled locally in Australia.

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us