Polymaker Polysher (Post-processing machine)

(Free Delivery)
The innovative Polysher improves, smooths and glosses the surface of 3D printed parts with Polymakers nebulized polyshing technology! This product is compatible with PolySmooth & PolyCast filament.

AUD ($495.00 Incl Gst) $450.00 Ex Gst
AUD ($595.00 Incl Gst) $540.91 Ex Gst
Add to cart Buy now Add to wish list

Polymaker Polysher post-processing machine

The Polysher™ is a desktop post processing unit designed to remove layer lines from PolySmooth™ and PolyCast™ prints. The Polysher™ uses Polymaker’s Layer-Free™ technology to create a fine mist of isopropyl alcohol which evenly smooths the model.

Polymaker Polishing

Key Features

Professional Surface Quality - The Polysher™ is a reliable and automatic solution which improves the surface quality of 3D printed parts, acheiving a professional smooth and glossy surface.

Intuitive & Easy To Use - The Polysher™ is designed to be intuitive and easy to use, simply turn the control dial to select your polishing time and sit back. The polishing process typically takes between 20 - 40 minutes for most models.

Safety First - The Polysher is air tight sealed so no spark can be generated inside the chamber. Polymakers Layer-Free™ technology uses cold liquid-phase polishing rather than heated vapour-phase smoothing, a safer form of post-processing. The Polysher's lift design also ensures IPA is contained inside the chamber when removing parts while the integrated smart electronics ensure maximum safety in work and education environments.

Detail Maintained - With Polymakers Layer-Free™ technology, the fine mist of isopropyl alcohol evenly coats the part while preserving details and dimensions.

Low Costs - The Polysher™ is an affordable solution which requires only a very small reservoir of Isopropyl Alcohol, recycling run-off IPA for efficient and low cost polishing.

Polymaker Polysher

Polymaker Polysher Architecture

Polymaker Polysher PolySmooth 3D Printed Headphones

Polymaker Polysher Headphones

To learn more about the Polysher™, click the "Technology, Safety and Operation" and "Specifications" tabs or click "Gallery" for more photos.

Technology

Polysher™ uses Polymaker's Layer-Free™ technology: Layer-Free™ technology involves exposing a 3D printed part to an aerosol of micro-sized alcohol droplets, generated by a rapidly vibrating, perforated membrane called the nebulizer. The aerosol will then be adsorbed by the surface of the 3D printed part and render it smooth and layer-free.

Polymaker Polysher

Safety

Polymakers technology is intrinsically safer than other smoothing techniques:
-  No heating is involved 
-  The nebulizer technology requires only a very small reservoir 
-  Isopropyl Alcohol is safer than smoothing chemicals like Acetone or MEK
-  It is a liquid-phase polishing rather than vapor-phase polishing process (the latter is more dangerous for a number of reasons)

Polymaker have also implemented a number of safety features into the machine: 
- Multiple sensors to detect any sign of malfunction of the nebulizer (e.g. running dry) 
- Chamber open/close sensor (the machine won’t start if the chamber is open, and will automatically terminate if the chamber is accidentally open during polishing) 
- All electronic components (running at very low voltages) are properly sealed, and no spark can be generated inside the chamber.

Operation

Polymaker Operation

  1. 3D print your part with PolySmooth™ or PolyCast™ (sold separately), just like what you normally do with PLA; 
  2. Fill the reservoir with isopropyl alcohol. (NOTE - Do not fill the reservoir with other liquids or solvents other than isopropyl alcohol or ethanol as this will damage the Polysher™.)
  3. Place your printed part in the Polysher™;
  4. Set the polishing time by turning the knob; a typical part takes 20 - 40 minutes, depending on the size of your part. 
  5. Once polishing is finished, the stage will automatically lift up for you to easily get the part. 

Operating the Polysher™ is that easy! 

Specs

Technology - Nebulized Aerosol Polishing

Compatible Material - PolySmooth™

Polishing Liquid - Isopropanol or ethanol, 70% or above [90% or higher recommended]

Polishing Time - 10 – 30 min typical (depending on part size)

Product Dimensions - 230 x 270 x 370 mm

Maximum Polishable Part Size - 150mm diameter x 180mm height

Operating Temperature - 15 – 32 °C

Storage Temperature - 0 – 38 °C

Power Requirements - 100 – 240 V, 2A max, 50/60 Hz

Polymaker Polysher RC Car Smooth 3D Print

Polysher Post-processing

Polymaker Polysher Architecture

Polymaker Polysher Fan Cover Black

Polymaker Polysher Polished Fan Duct

Polymaker Polysher PolySmooth Assorted Models

Polymaker PolyCast FilamentPolymaker PolySmooth Slate GreyPolymaker PolySmooth Pink

 

3D Printing Solutions was established in 2013 by director Michael Tyson and has since launched an online and retail store supporting and selling 3D printers to enthusiasts, businesses, government and educational institutions Australia-wide. 

One of our key philosophies has been to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our hands on approach and experience with these brands ensure we can provide customers detailed tips and advice  

Key Benefits

  • Australian owned online and retail store operated since 2013.
  • Quality Assured Products
  • Free shipping on orders over $150* (excludes select products)
  • Credit terms provided for government and education organizations.
  • Official Polymaker reseller.
  • We have hands on experience using Polymakers products. Phone, email and local support handled by our trained and knowledgeable staff.
  • Growing list of online resources for beginners and advanced users.
  • Warranty handled locally in Australia.

Related products

PolySmooth Coral Red 750g 1.75mm
Polymaker PolySmooth Coral Red 1.75mm 750G
AUD ($59.95 Incl Gst) $54.50 Ex Gst
PolySmooth Coral Red 750g 1.75mm
Polymaker PolySmooth Coral Red 2.85mm 750G
AUD ($59.95 Incl Gst) $54.50 Ex Gst
PolySmooth Electric Blue 750g 1.75mm
Polymaker PolySmooth Electric Blue 1.75mm 750G
AUD ($59.95 Incl Gst) $54.50 Ex Gst
Previous 1 2 3 4 5 Next 

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us