COVID-19 UPDATE - We are still shipping daily during the COVID19 pandemic. Please note some slight delivery delays may occur due to border crossing delays.
Olsson Ruby Nozzle Original 1.75mm

The classic Olsson Ruby Nozzle , featuring excellent wear-resistance and compatible with a wide range of 1.75mm printers including E3D, RepRap, Prusa etc.

Nozzle Diameter - 0.4mm

AUD ($169.90 Incl Gst) $154.45 Ex Gst
Sold out.
Add to wish list

It is important to have an abrasion resistant nozzle when printing composite and abrasive materials like Carbon and glass fiber-filled filament. The classic Olsson Ruby Nozzle is compatible with a wide range of printers and features excellent performance, wear-resistance and reliability. 

The classic Olsson Ruby has been designed to be compatible with the popular form factor of a nozzle with a 7mm long M6x1 external threading and 12.5mm overall length, like on the E3D hotends.

Please click the 'Compatibility' tab to see if your 3D printer is suitable.

Wear Resistance Nozzles

Effects of abrasive compounds left to right; Brass, 0.3kg carbon fiber filled filament printed | Stainless steel, 1kg carbon fiber filled filament printed | Hardened steel, 4kg carbon fiber filled filament printed.

Features

ONE NOZZLE - The Olsson Ruby will work with a huge range of materials. PLA, ABS, CPE/PET, Nylon, and composites with abrasive additives such as Carbon fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment, are some of the materials successfully tested so far. It works equally well for printing common FDM / FFF 3D printing materials up to 300°C.

HIGHLY WEAR RESISTANT - The ruby mounted at the tip makes sure that even the toughest materials will be printable. It was originally designed for printing with Boron Carbide (B4C), the third hardest known material in the world.

EXCELLENT HEAT CONDUCTIVITY - Since most of the Olsson Ruby is made from brass, with its excellent heat conductivity, performance and throughput is first-class.

VERIFIED PERFORMANCE - People all over the world have been testing different iterations of the ruby nozzle since early 2016. Olsson are very happy to have received only good printing results from this community.

MANUFACTURING QUALITY - The Olsson Ruby is manufactured, assembled and tested in a high-quality facility in Sweden. This is why 3DVerkstan guarantees the very best quality and tolerances.

Olsson Ruby Nozzle

The image to the left is the front face of a ruby nozzle that has printed more than 8kg of carbon fiber filled materials. The lines made by the surface grinding of the ruby during production is still visible, also the thinnest edges are still perfectly sharp. The black specs you see on the inside is just residue from the carbon filled filament. Olsson have since reported customers that printed 50kg+ of highly abrasive filaments without any measurable wear on the nozzle.

Compatibility

THE OLSSON RUBY 1.75MM

  • Every printer with a E3D V4/V5/V6 1.75mm hotend or similar geometry, including:
  • Prusa Research i3 MK2/ MK2S / MK3 *6
  • E3D BigBox
  • gCreate gMax 1.5XT+
  • Felix Pro 2 * 4
  • Robo3D R2
  • Raise3D N1/N2 *5

The Olsson Ruby is NOT compatible with the Raise3D Pro2 series due to a change in the heat break geometry.

FOOTNOTES

Manufacturers can occasionally alter the design of their printers so please note compatibility for any 3rd party products may change without notice.

*1 = You will need to adjust the fan shroud since the nozzle is shorter than the original nozzle.
*2 = You will need to mount it with the nozzle not placed against the front face of the heater block but against the heat break/isolator tube to create a seal.
*3 = Will require disabling of the automatic bed leveling since the ruby tip is not conductive.
*4 = Several testers reports success. Ruby is longer than stock nozzle so Z height needs to be adjusted.
*5 = Adjustment of z-stop required, also see notes on the revision of your Raise3D printer in the Instructions for use
*6 = Lower the heatsink and heatbreak half a turn while the block is hot to ensure a proper seal.

Installation

Please click here for installation instructions.

Specifications

Olsson Ruby Specifications Original

3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.

Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.

Key Benefits

  • Australian owned online and retail store operated since 2013.
  • Quality assured products.
  • Free shipping on orders over $150 across Australia* (* Excludes select products where noted and delivery to some remote regions.)
  • Official Olsson reseller.
  • We have hands on experience using Olsson products. Phone, email and local support handled by our trained and knowledgeable staff.
  • Growing list of online resources for beginners and advanced users.
  • Support and warranty handled locally in Australia.

Related products

PolyMide PA6-GF Nylon Filament
Polymaker PolyMide Nylon PA6-GF Grey 1.75mm 2kg
AUD ($239.95 Incl Gst) $218.14 Ex Gst
Previous 1 Next 

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us