COVID-19 UPDATE - We are still shipping daily during the COVID19 pandemic. Please note some slight delivery delays may occur due to border crossing delays.
Formlabs Tough 2000 3D Printer Resin Formlabs Tough 2000 Resin Formlabs Tough 2000 Resin Formlabs Tough 2000 Resin Formlabs Tough 2000 Resin
Formlabs Tough 2000 Resin 1L Cartridge

(Free Delivery)

Simulating the strength and stiffness of ABS, Tough 2000 Resin produces strong and sturdy parts that should not bend easily.

AUD ($415.00 Incl Gst) $377.27 Ex Gst
Add to cart Buy now Add to wish list

Whether you’re optimizing your manufacturing process, rapidly iterating through designs, or assessing form, fit, and function, Formlabs Engineering Resins are formulated to withstand extensive testing and perform under stress.

Tough 2000 Resin is the strongest and stiffest material in our functional family of Tough and Durable Resins. Choose Tough 2000 Resin for prototyping strong and sturdy parts that should not bend easily.

  • Strong and stiff prototypes
  • Jigs and fixtures requiring minimal deflection 
  • Simulating the strength and stiffness of ABS

The “2000” in the name represents the material’s tensile modulus. If you need a less stiff material, try Tough 1500 Resin or Durable Resin. Tough 2000 Resin is a reformulation of our popular Tough Resin. Tough 2000 Resin offers more advanced mechanical properties and a new look. 

  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3BL
Printing Settings
Print Resolutions* 100 and 50 microns.
Post Curing Required
Tank Requires Resin Tank LT for Form 2.
Requires Form 3 Resin Tank V2 for Form 3.

*Layer height compatibility can depend on printer model.

NOTE: Tough 2000 Resin decreases the lifetime of resin tanks. Read more about Resin Tank LT lifetime and Form 3 Resin Tank lifetime.

For more printing and finishing tips relating to Tough 2000 Resin (V1), please read this article written by Formlabs.

STORAGE  & Disposal

Formlabs materials require proper storage to maximize the usable lifetime. Light and temperature affect shelf life significantly. For optimal results, follow Formlabs guidelines for storing and handling resins. 

  • Use a different resin tank for each type of Formlabs resin. Cleaning the resin tank to change resins may lead to contamination and print failures.
  • To avoid contamination, do not pour resin back into cartridges.
  • Store resin according to the SDS, away from direct sunlight in a dry, cool, and well-ventilated area.
  • Shake resin containers approximately every two weeks when in storage to keep resins thoroughly mixed.
  • For long-term storage, pour resin into a separate, opaque container from the resin tank. Formlabs recommends wide-mouth opaque HDPE or polypropylene bottles. Containers made of other materials may leak.
  • Dispose of liquid resin (whether liquid, dissolved in IPA, or partially cured) and anything contaminated with liquid resin according to environmental regulations.

For more resin care instructions and safety case precautions please read this article written by Formlabs.

Volume 1 Litre

Technical Data
Thermal Property Green ** Post-Cured *** Testing Method
Heat Deflection Temperature @ 1.8 MPa 42˚C 53˚C ASTM D 648-16
Heat Deflection Temperature @ 0.45 MPa 48˚C 63˚C ASTM D 648-16


Mechanical Property Green ** Post-Cured *** Testing Method
Ultimate Tensile Strength 29 MPa 46 MPa ASTM D638-14
Tensile Modulus 1.2 GPa 2.2 GPa
Elongation at Break 74% 48%
Flexural Strength 17 MPa 65 MPa ASTM D 790-15
Flexural Modulus 0.45 GPa 1.9 GPa ASTM D 790-15
Notched IZOD 79 J/m 40 J/m ASTM D256-10

** Data was obtained from green parts, printed using Form 2, 100 μm, Tough 2000 settings, without additional treatments.
*** Data was obtained from parts printed using Form 2, 100 μm, Tough 2000 settings and post-cured with a Form Cure for 120 minutes at 80 °c.

We have full MDS for Formlabs Tough 2000 resin and other Formlabs products. Contact us to enquire!

The typical values presented in Formlabs data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.

  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3BL

3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.

Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.

Key Benefits

  • Australian owned online and retail store operated since 2013.
  • Quality assured products.
  • Free shipping on orders over $150 across Australia* (* Excludes select products where noted and delivery to some remote regions.)
  • Authorized Formlabs partner.
  • We have hands on experience using Formlabs products. Phone, email and local support handled by our trained and knowledgeable staff.
  • Growing list of online resources for beginners and advanced users.
  • Support and warranty handled locally in Australia.

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us