COVID-19 UPDATE - We are still shipping daily during the COVID19 pandemic. Please note some slight delivery delays may occur due to border crossing delays.
Formlabs Resin Rigid 10K Resin Formlabs Rigid 10K Resin Cartridge Formlabs Rigid 10K Resin Cartridge Formlabs Rigid 10K Resin 3D Prints Formlabs Rigid 10K Resin 3D Prints
Formlabs Rigid 10K Resin 3D Prints Formlabs Rigid 10K Resin 3D Prints
Formlabs Rigid 10K Resin 1L Cartridge Free Delivery

Simulating the stiffness of glass and fiber-filled thermoplastics, Rigid 10K Resin is an ideal choice for precise industrial parts that need to withstand significant load without bending.

AUD ($555.00 Incl Gst) $504.55 Ex Gst
Sold out.
Add to wish list

Formlabs Rigid 10K 3D Printer Resin

Choose Formlabs family of Rigid Resins when prototyping strong and stiff parts that need to resist bending. Parts made from these materials are thermally and chemically resistant and will be dimensionally stable under load, but will experience brittle failure if pushed to their limits.

This highly glass-filled resin is the stiffest material in our engineering portfolio. Choose Rigid 10K Resin for precise industrial parts that need to withstand significant load without bending. Rigid 10K Resin exhibits a smooth matte finish and is highly resistant to heat and chemicals.

  • Short-run injection mold masters and inserts
  • Heat resistant and fluid exposed components, jigs, and fixtures
  • Aerodynamic test models
  • Simulates stiffness of glass and fiber-filled thermoplastics

The “10K” in the name represents the material’s tensile modulus. If you need a less stiff material, try Rigid 4000 Resin.


Compatibility
  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3BL
Printing Settings
Print Resolutions* 100 and 50 microns.
Post Curing Required
Tank Requires Resin Tank LT for Form 2.
Requires Form 3 Resin Tank V2 for Form 3.

*Layer height compatibility can depend on printer model.

NOTE: Rigid 10K Resin decreases the lifetime of resin tanks. Read more about Resin Tank LT lifetime and Form 3 Resin Tank lifetime.

For more printing and finishing tips relating to Rigid 10K Resin (V1), please read this article written by Formlabs.


STORAGE  & Disposal

Formlabs materials require proper storage to maximize the usable lifetime. Light and temperature affect shelf life significantly. For optimal results, follow Formlabs guidelines for storing and handling resins. 

  • Use a different resin tank for each type of Formlabs resin. Cleaning the resin tank to change resins may lead to contamination and print failures.
  • To avoid contamination, do not pour resin back into cartridges.
  • Store resin according to the SDS, away from direct sunlight in a dry, cool, and well-ventilated area.
  • Shake resin containers approximately every two weeks when in storage to keep resins thoroughly mixed.
  • For long-term storage, pour resin into a separate, opaque container from the resin tank. Formlabs recommends wide-mouth opaque HDPE or polypropylene bottles. Containers made of other materials may leak.
  • Dispose of liquid resin (whether liquid, dissolved in IPA, or partially cured) and anything contaminated with liquid resin according to environmental regulations.

For more resin care instructions and safety case precautions please read this article written by Formlabs.


Specification
Volume 1 Litre

Technical Data
Thermal Property Green ** Post-Cured *** Post-Cured at 70˚C **** Testing Method
Heat Deflection Temperature @ 1.8 MPa 56˚C 82˚C 110˚C ASTM D 648-16
Heat Deflection Temperature @ 0.45 MPa 65˚C 163˚C 218˚C ASTM D 648-16

 

Mechanical Property Green ** Post-Cured at *** Post-Cured + Thermal Cure **** Testing Method
Ultimate Tensile Strength 55 MPa 65 MPa 53 MPa ASTM D638-14
Tensile Modulus 7.5 GPa 10 GPa 10 GPa
Elongation at Break 2% 1% 1%
Flexural Strength 84 MPa 126 MPa 103 MPa ASTM D 790-15
Flexural Modulus 6 MPa 9 MPa 10 MPa ASTM D 790-15
Notched IZOD 16 J/m 16 J/m 18 J/m ASTM D256-10
Unnotched IZOD 41 J/m 41 J/m 41 J/m ASTM D4812-11

** Data was obtained from green parts, printed using Form 3, 100 μm, Rigid 10K settings, without additional treatments.
*** Data was obtained from parts printed using Form 3, 100 μm and post-cured with a Form Cure for 60 minutes at 70°C.
**** Data was obtained from parts printed using Form 3, 100 μm and post-cured with a Form Cure for 60 minutes at 60°C and an additional thermal cure at 125°C for 90 minutes

Click here to download the Formlabs Rigid 10K technical data sheet or contact us to enquire!

To the best of our knowledge the information contained above is accurate. However, 3D Printing Solutions & Formlabs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof. Due to the nature of 3D printing the data should not be used for design specifications or quality control purposes.


Compatibility
  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3BL

3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.

Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.

Key Benefits

  • Australian owned online and retail store operated since 2013.
  • Quality assured products.
  • Free shipping on orders over $150 across Australia* (* Excludes select products where noted and delivery to some remote regions.)
  • Authorized Formlabs partner.
  • We have hands on experience using Formlabs products. Phone, email and local support handled by our trained and knowledgeable staff.
  • Growing list of online resources for beginners and advanced users.
  • Support and warranty handled locally in Australia.

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us