Buy 3D Printers
Featuring high heat deflection temperature (HDT) up to 238 °C, High Temp Resin is ideal for temperature resistant molds, airflows & housings.
Whether you’re optimizing your manufacturing process, rapidly iterating through designs, or assessing form, fit, and function, Formlabs Engineering Resins are formulated to withstand extensive testing and perform under stress.
High Temp Resin offers a heat deflection temperature (HDT) of 238 °C @ 0.45 MPa, the highest among Formlabs resins. Use it to print detailed, precise prototypes with high temperature resistance.
Form 2 Resin Tank (PDMS)
Form 2 LT Tank
Form 3/3B Resin Tank V1
Form 3/3B Resin Tank V2
Form 3/3B Resin Tank V2.1
Form 3L/3BL Resin Tank V1
*Layer height compatibility can depend on printer model.
Note: Print settings for this material may not be available yet on Form 3L and Form 3BL printers.
For more printing and finishing tips relating to High Temp Resin (V1), please read this article written by Formlabs.
Formlabs materials require proper storage to maximize the usable lifetime. Light and temperature affect shelf life significantly. For optimal results, follow Formlabs guidelines for storing and handling resins.
For more resin care instructions and safety case precautions please read this article written by Formlabs.
** Data was obtained from green parts, printed using Form 2, 100 μm, High Temp settings, washed for 5 minutes in Form Wash and air dried without post cure.
*** Data was obtained from parts printed using a Form 2, 100 micron, High Temp settings, and post-cured with Form Cure at 80 °C for 120 minutes.
**** Data was obtained from parts printed using a Form 2, 100 micron, High Temp settings, and post-cured with Form Cure at 80 °C for 120 minutes plus an additional thermal cure in a lab oven at 160 °C for 180 minutes.
***** Data was obtained from parts printed using a Form 2, 100 micron, High Temp settings, and post-cured with Form Cure at 60 °C for 60 minutes.
****** Data was obtained from parts printed using a Form 2, 100 micron, High Temp settings, and postcured with Form Cure at 60 °C for 60 minutes plus an additional thermal cure in a lab oven at 160 °C for 90 minutes
We have full MDS for Formlabs High Temp resin and other Formlabs products. Contact us to enquire!
The typical values presented in Formlabs data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.
3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.
Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.
Dont know where to start? Or which filament will suit your application?
We have a broad range of support options including Telephone Support