Australia

  Store / Resins / Formlabs Resin / Formlabs Durable Resin 1L Cartridge
COVID-19 UPDATE - We are still shipping daily during the COVID19 pandemic. Please note some slight delivery delays may occur due to border crossing delays.
Formlabs Durable 3D Printer Resin Formlabs Durable Resin Formlabs Durable Resin Formlabs Durable Resin
Formlabs Durable Resin 1L Cartridge

(Free Delivery)

Simulating the strength and stiffness of polyethylene (PE), Durable Resin produces impact resistant, squeezable parts and low-friction assemblies.
AUD ($415.00 Incl Gst) $377.27 Ex Gst
Add to cart Buy now Add to wish list

Whether you’re optimizing your manufacturing process, rapidly iterating through designs, or assessing form, fit, and function, Formlabs Engineering Resins are formulated to withstand extensive testing and perform under stress.

Durable Resin is the most pliable, impact resistant, and lubricious material in our functional family of Tough and Durable Resins. Choose Durable Resin for squeezable parts and low-friction assemblies.

  • Squeezable prototypes and low friction assemblies
  • Jigs and fixtures undergoing significant impacts
  • Low friction assemblies and non-degrading surfaces
  • Simulating the strength and stiffness of polyethylene (PE)
Compatibility
  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3BL
Printing Settings
Print Resolutions* 100 and 50 microns.
Post Curing Required

*Layer height compatibility can depend on printer model.

For more printing and finishing tips relating to Durable Resin (V1), please read this article written by Formlabs.

STORAGE  & Disposal

Formlabs materials require proper storage to maximize the usable lifetime. Light and temperature affect shelf life significantly. For optimal results, follow Formlabs guidelines for storing and handling resins. 

  • Use a different resin tank for each type of Formlabs resin. Cleaning the resin tank to change resins may lead to contamination and print failures.
  • To avoid contamination, do not pour resin back into cartridges.
  • Store resin according to the SDS, away from direct sunlight in a dry, cool, and well-ventilated area.
  • Shake resin containers approximately every two weeks when in storage to keep resins thoroughly mixed.
  • For long-term storage, pour resin into a separate, opaque container from the resin tank. Formlabs recommends wide-mouth opaque HDPE or polypropylene bottles. Containers made of other materials may leak.
  • Dispose of liquid resin (whether liquid, dissolved in IPA, or partially cured) and anything contaminated with liquid resin according to environmental regulations.

For more resin care instructions and safety case precautions please read this article written by Formlabs.

Specification
Volume 1 Litre
Technical Data
Thermal Property Green ** Post-Cured *** Testing Method
Heat Deflection Temperature @ 1.8 MPa N/A N/A ASTM D 648-16
Heat Deflection Temperature @ 0.45 MPa <30˚C 41˚C ASTM D 648-16

 

Mechanical Property Green ** Post-Cured *** Testing Method
Ultimate Tensile Strength 13 MPa 28 MPa ASTM D638-14
Tensile Modulus 0.24 GPa 1.0 GPa
Elongation at Break 75% 55%
Flexural Strength 1.0 MPa 24 MPa ASTM D 790-15
Flexural Modulus 0.04 GPa 0.66 GPa ASTM D 790-15
Notched IZOD 127 J/m 114 J/m ASTM D256-10

** Data was obtained from green parts, printed using Form 2, 100 μm, Durable settings, without additional treatments.
*** Data was obtained from parts printed using Form 2, 100 μm, Durable settings and post-cured with a Form Cure for 120 minutes at 60 °c.

We have full MDS for Formlabs Durable resin and other Formlabs products. Contact us to enquire!

The typical values presented in Formlabs data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.

Compatibility
  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3BL

3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.

Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.

Key Benefits

  • Australian owned online and retail store operated since 2013.
  • Quality assured products.
  • Free shipping on orders over $150 across Australia* (* Excludes select products where noted and delivery to some remote regions.)
  • Authorized Formlabs partner.
  • We have hands on experience using Formlabs products. Phone, email and local support handled by our trained and knowledgeable staff.
  • Growing list of online resources for beginners and advanced users.
  • Support and warranty handled locally in Australia.

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us

Shipping to: New South Wales (NSW) - Australian Capital Territory (ACT) - South Australia (SA) - Western Australia (WA) - Victoria (Vic) - Queensland (QLD) - Northern Territory (NT) - Tasmania (TAS) - New Zealand (NZ)

Copyright 2022 3D Printing Solutions | Privacy Statement | Terms Of Use