COVID-19 UPDATE - We are still shipping daily during the COVID19 pandemic. Please note some slight delivery delays may occur due to border crossing delays.
Formlabs Draft Fast 3D Printing Resin Formlabs Draft Resin Formlabs Draft Resin Formlabs Draft Resin
Formlabs Draft Resin (V2) 1L Cartridge

(Free Delivery)

Draft Resin prints up to four times faster than Formlabs standard materials, making it ideal for initial prototypes.

AUD ($300.00 Incl Gst) $272.73 Ex Gst
Add to cart Buy now Add to wish list

Draft Resin prints up to four times faster than Formlabs standard materials, making it ideal for initial prototypes and rapid iterations to help bring products to market faster. Parts printed with Draft Resin exhibit a smooth grey finish and high accuracy. Use 200-micron settings for fast print speeds, or use 100-micron settings for models with finer details.

From fast print initiation speeds to minimal support removal, wash, and cure times, Draft Resin has an optimized workflow to truly maximize efficiency.

  • Initial prototypes
  • Same-day design iterations
  • Live 3D printing demos
  • High-throughput applications
  • Quickly printing large parts

This version of Draft Resin is a reformulation of a previous version. This current version offers an improved surface finish, a more professional appearance, and is easier to use.


Compatibility
  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3B
Printing Settings
Print Resolutions* 200 and 100 microns.
Post Curing Required
Tank Resin Tank LT (Form 2) or Resin Tank V2 (Form 3) are required for printing with Draft Resin V2.

*Layer height compatibility can depend on printer model.

For more printing and finishing tips relating to Draft Resin (V2), please read this article written by Formlabs.


STORAGE  & Disposal

Formlabs materials require proper storage to maximize the usable lifetime. Light and temperature affect shelf life significantly. For optimal results, follow Formlabs guidelines for storing and handling resins. 

  • Use a different resin tank for each type of Formlabs resin. Cleaning the resin tank to change resins may lead to contamination and print failures.
  • To avoid contamination, do not pour resin back into cartridges.
  • Store resin according to the SDS, away from direct sunlight in a dry, cool, and well-ventilated area.
  • Shake resin containers approximately every two weeks when in storage to keep resins thoroughly mixed.
  • For long-term storage, pour resin into a separate, opaque container from the resin tank. Formlabs recommends wide-mouth opaque HDPE or polypropylene bottles. Containers made of other materials may leak.
  • Dispose of liquid resin (whether liquid, dissolved in IPA, or partially cured) and anything contaminated with liquid resin according to environmental regulations.

For more resin care instructions and safety case precautions please read this article written by Formlabs.


Specification
Volume 1 Litre

Technical Data
Thermal Property Green ** Post-Cured at Room Temperature *** Post-Cured at 60˚C **** Testing Method
Heat Deflection Temperature @ 1.8 MPa 37˚C 44˚C 57˚C ASTM D 648-18
Heat Deflection Temperature @ 0.45 MPa 43˚C 53˚C 74˚C ASTM D 648-18

 

Mechanical Property Green ** Post-Cured at Room Temperature *** Post-Cured at 60˚C **** Testing Method
Ultimate Tensile Strength 24 MPa 36 MPa 52 MPa ASTM D638-14
Tensile Modulus 0.8 GPa 1.7 GPa 2.3 GPa
Elongation at Break 14% 5% 4%
Flexural Modulus 0.6 GPa 1.8 GPa 2.3 GPa ASTM D 790-17
Notched IZOD 26 J/m  29 J/m 26 J/m ASTM D256-10

** Data was obtained from green parts, printed using a Form 3, 200 micron, Draft v2 Resin settings, washed in Form Wash and air dried without post cure.
*** Data was obtained from parts printed us-ing a Form 3, 200 micron, Draft v2 Resin settings and post-cured with a Form Cure at Room Temperature for 5 minutes.
**** Data was obtained from parts printed using a Form 3, 200 micron, Draft v2 Resin settings, and post-cured with Form Cure at 60°C for 5 minutes.

We have full MDS for Formlabs Draft resin other Formlabs products. Contact us to enquire!

The typical values presented in Formlabs data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.


Compatibility
  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3B

3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.

Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.

Key Benefits

  • Australian owned online and retail store operated since 2013.
  • Quality assured products.
  • Free shipping on orders over $150 across Australia* (* Excludes select products where noted and delivery to some remote regions.)
  • Authorized Formlabs partner.
  • We have hands on experience using Formlabs products. Phone, email and local support handled by our trained and knowledgeable staff.
  • Growing list of online resources for beginners and advanced users.
  • Support and warranty handled locally in Australia.

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us