COVID-19 UPDATE - We are still shipping daily during the COVID19 pandemic. Please note some slight delivery delays may occur due to border crossing delays.
Formlabs Colour Kit Resin Formlabs Colour Kit Resin Formlabs Colour Kit Resin Formlabs Colour Kit Resin Formlabs Colour Kit Resin
Formlabs Colour Kit

Free Delivery

Formlabs integrated color mixing resin enables 3D printing in a range of colors without the additional work of finishing and painting. environment.

AUD ($360.00 Incl Gst) $327.27 Ex Gst
Add to cart Buy now Add to wish list

Formlabs Colour Kit

The first integrated color mixing solution for resin, the Formlabs Color Kit enables 3D printing in a range of colors without the manual work of finishing and painting. Field test product concepts more quickly with 3D prints that fit their environment. Color Kit enables you to print many models in one consistent color, right off the printer, without the additional work of finishing and painting.

Color Kit contains a Color Base cartridge and all five Color Pigments + syringes. Use Color Kit to mix and print matte, opaque parts in a range of colors without the manual work of finishing and painting.

Infinite Potential - Choose from 16 tested recipes, or use our Color Picker tool to mix a custom color.

Uniform Color - Color Kit provides a consistent, uniform color throughout the entire part.

Smooth Surface Finish - Perfectly smooth right out of the printer, parts printed on the Formlabs stereolithography printers have the polish and finish of a final product.


Formlabs Colour Kit Resin


Compatibility
  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3+
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3B+
  • Formlabs Form 3BL
Printing Settings
Print Resolutions* 100, 50 & 25 microns.
Post Curing Required

*Layer height compatibility can depend on printer model.


STORAGE  & Disposal

Formlabs materials require proper storage to maximize the usable lifetime. Light and temperature affect shelf life significantly. For optimal results, follow Formlabs guidelines for storing and handling resins. 

  • Use a different resin tank for each type of Formlabs resin. Cleaning the resin tank to change resins may lead to contamination and print failures.
  • To avoid contamination, do not pour resin back into cartridges.
  • Store resin according to the SDS, away from direct sunlight in a dry, cool, and well-ventilated area.
  • Shake resin containers approximately every two weeks when in storage to keep resins thoroughly mixed.
  • For long-term storage, pour resin into a separate, opaque container from the resin tank. Formlabs recommends wide-mouth opaque HDPE or polypropylene bottles. Containers made of other materials may leak.
  • Dispose of liquid resin (whether liquid, dissolved in IPA, or partially cured) and anything contaminated with liquid resin according to environmental regulations.

For more resin care instructions and safety case precautions please read this article written by Formlabs.


Technical Data

The following material properties are comparable for Clear Resin, White Resin, Grey Resin, Black Resin, and Color Kit.

THERMAL PROPERTIES

  Value Testing Method
Heat Deflection Temperature
@ 1.8 MPa

Green ᵃ- 43˚C
Post-Cured ᵇ - 58˚C

ASTM D 648-16
Heat Deflection Temperature
​@ 0.45 MPa

Green ᵃ- 50˚C
Post-Cured ᵇ - 73˚C

ASTM D 648-16

MECHANICAL PROPERTIES

  Value Testing Method
Ultimate Tensile Strength

Green ᵃ- 38 MPa
Post-Cured ᵇ - 65 MPa

ASTM D638-14
Tensile Modulus

Green ᵃ- 1.6 GPa
Post-Cured ᵇ - 2.8 GPa

ASTM D638-14
Elongation at Break Green ᵃ- 12%
Post-Cured ᵇ - 6%
ASTM D638-14
Flexural Modulus Green ᵃ- 1.3 GPa
Post-Cured ᵇ - 2.2 GPa
ASTM D 790-15
Notched IZOD Green ᵃ- 16 25 J/m
Post-Cured ᵇ - 25 J/m
ASTM D256-10

ᵃ Data was obtained from green parts, printed using Form 2, 100 μm, Clear settings, without additional treatments.

ᵇ Data was obtained from parts printed using Form 2, 100 μm, Clear settings and post-cured with 1.25 mW/cm' of 405 nm LED light for 60 minutes at 60 °c.

We have full MDS for Formlabs Colour Kit resin other Formlabs products. Contact us to enquire!

The typical values presented in Formlabs data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.


Compatibility
  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3+
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3B+
  • Formlabs Form 3BL

3D Printing Solutions Australia Buy Filament


3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.

Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.

Key Benefits

  • Australian owned online and retail store operated since 2013.
  • Quality assured products.
  • Free shipping on orders over $150 across Australia* (* Excludes select products where noted and delivery to some remote regions.)
  • Authorized Formlabs partner.
  • We have hands on experience using Formlabs products. Phone, email and local support handled by our trained and knowledgeable staff.
  • Growing list of online resources for beginners and advanced users.
  • Support and warranty handled locally in Australia.

Related products

Formlabs 800ml Colour Base Resin
Formlabs Colour Base Resin 0.8L Cartridge
AUD ($253.00 Incl Gst) $230.00 Ex Gst
Formlabs Black
Formlabs Black Pigment
AUD ($65.00 Incl Gst) $59.09 Ex Gst
Formlabs Cyan
Formlabs Cyan Pigment
AUD ($65.00 Incl Gst) $59.09 Ex Gst
Previous 1 2 Next 

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us