COVID-19 UPDATE - We are still shipping daily during the COVID19 pandemic. Please note some slight delivery delays may occur due to border crossing delays.
Formlabs Clear 3D Printing Resin Formlabs Clear Resin Formlabs Clear Resin Formlabs Clear Resin
Formlabs Clear Resin (V4) 1L Cartridge

Free Delivery

With a matte surface finish, opaque appearance, and precise details, Formlabs Clear Resin is ready to use right off the printer.

AUD ($300.00 Incl Gst) $272.73 Ex Gst
Add to cart Buy now Add to wish list

Formlabs Clear Resin

3D print strong, precise concept models and prototypes that bring your ideas to life with Formlabs’ library of Standard Resins. With a matte surface finish, opaque appearance, and precise details, prints are ready to use right off the printer. Their neutral undertone makes a great base for parts that will eventually be painted or undergo other finishing processes.

Clear Resin is great for fluidics and moldmaking, optics, lighting, and any parts requiring translucency or showcasing internal features. Stereolithography 3D printing technology makes clear prints possible on the desktop.

High Detail - For demanding applications, Formlabs carefully-engineered Clear resin capture the finest features in your model.

Strong and Precise - Formlabs Clear resin creates accurate and robust parts, ideal for rapid prototyping and product development.

Smooth Surface Finish - Perfectly smooth right out of the printer, parts printed in Formlabs Clear resin have the polish and finish of a final product.

  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3+
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3B+
  • Formlabs Form 3BL
Printing Settings
Print Resolutions* 100, 50 & 25 microns.
Post Curing Required

*Layer height compatibility can depend on printer model.

STORAGE  & Disposal

Formlabs materials require proper storage to maximize the usable lifetime. Light and temperature affect shelf life significantly. For optimal results, follow Formlabs guidelines for storing and handling resins. 

  • Use a different resin tank for each type of Formlabs resin. Cleaning the resin tank to change resins may lead to contamination and print failures.
  • To avoid contamination, do not pour resin back into cartridges.
  • Store resin according to the SDS, away from direct sunlight in a dry, cool, and well-ventilated area.
  • Shake resin containers approximately every two weeks when in storage to keep resins thoroughly mixed.
  • For long-term storage, pour resin into a separate, opaque container from the resin tank. Formlabs recommends wide-mouth opaque HDPE or polypropylene bottles. Containers made of other materials may leak.
  • Dispose of liquid resin (whether liquid, dissolved in IPA, or partially cured) and anything contaminated with liquid resin according to environmental regulations.

For more resin care instructions and safety case precautions please read this article written by Formlabs.

Volume 1 Litre.

Technical Data

The following material properties are comparable for Clear Resin, White Resin, Grey Resin, Black Resin, and Color Kit.


  Value Testing Method
Heat Deflection Temperature
@ 1.8 MPa

Green ᵃ- 43˚C
Post-Cured ᵇ - 58˚C

ASTM D 648-16
Heat Deflection Temperature
​@ 0.45 MPa

Green ᵃ- 50˚C
Post-Cured ᵇ - 73˚C

ASTM D 648-16


  Value Testing Method
Ultimate Tensile Strength

Green ᵃ- 38 MPa
Post-Cured ᵇ - 65 MPa

ASTM D638-14
Tensile Modulus

Green ᵃ- 1.6 GPa
Post-Cured ᵇ - 2.8 GPa

ASTM D638-14
Elongation at Break Green ᵃ- 12%
Post-Cured ᵇ - 6%
ASTM D638-14
Flexural Modulus Green ᵃ- 1.3 GPa
Post-Cured ᵇ - 2.2 GPa
ASTM D 790-15
Notched IZOD Green ᵃ- 16 25 J/m
Post-Cured ᵇ - 25 J/m
ASTM D256-10

ᵃ Data was obtained from green parts, printed using Form 2, 100 μm, Clear settings, without additional treatments.

ᵇ Data was obtained from parts printed using Form 2, 100 μm, Clear settings and post-cured with 1.25 mW/cm' of 405 nm LED light for 60 minutes at 60 °c.

We have full MDS for Formlabs Clear resin other Formlabs products. Contact us to enquire!

The typical values presented in Formlabs data sheet are intended for reference and comparison purposes only. Due to the nature of 3D printing they should not be used for design specifications or quality control purposes.

  • Formlabs Form 2
  • Formlabs Form 3
  • Formlabs Form 3+
  • Formlabs Form 3L
  • Formlabs Form 3B
  • Formlabs Form 3B+
  • Formlabs Form 3BL

3D Printing Solutions Australia Buy Filament

3D Printing Solutions was established in 2013 by CEO Michael Tyson to distribute high quality 3D printers and supplies to enthusiasts, businesses, government and educational institutions across Australia and New Zealand.

Australian owned and operated, here at 3D Printing Solutions we are dedicated to ensuring your success by providing high quality solutions and sharing our years of hands on experience and support. One of our key philosophies is to thoroughly test the printer brands and filaments we sell to ensure they meet our key quality standards. Our collaborative and in-depth experience with these brands ensures we can provide detailed comparisons and advice to customers.

Key Benefits

  • Australian owned online and retail store operated since 2013.
  • Quality assured products.
  • Free shipping on orders over $150 across Australia* (* Excludes select products where noted and delivery to some remote regions.)
  • Authorized Formlabs partner.
  • We have hands on experience using Formlabs products. Phone, email and local support handled by our trained and knowledgeable staff.
  • Growing list of online resources for beginners and advanced users.
  • Support and warranty handled locally in Australia.

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us