Print without the nozzle jams and hassles most wood filament brings

PolyWood™ is a first of its kind wood like filament. All other wood-like 3D Printer filaments use a blend of polymer and chopped wood powder. PolyWood™ is unique as it uses no real wood! This eliminates the risk of nozzle jams common amongst other wood filaments.

A different 3D Printing Wood Filament

PolyWood™ is not like your typical wood mimic 3D printing filament. All existing wood mimic 3D printing filaments are based on blends of polymer and wood powder. This method can lead to nozzle jams and issues when printing. PolyWood™ is developed using a unique foaming technology that delivers a material that mimics wood structurally! That’s right, Polywood™ is composed entirely of Polymers, so you can have excellent print quality without the risk of those nasty nozzle jams.

35-40% lighter than regular PLA

PolyWood™ is a first of its kind 3D Printable foam material. Its density is on average 0.8 g/cm³, which is 35-40% lighter than regular PLA. Not only does this mimic the light weight nature of natural wood, this leads PolyWood to be used for a variety of potential applications such as light weight structures, drones, membrane, damping devices and with PolyWoods post processing potential, watertight models.

Compare Filaments Shop PolyWood Polymaker Info
Key Features

Wood with no mess

PolyWood™is composed entirely of polymers, mimicking the structure, look and weight of real wood! The Results? Excellent print quality without the risk of nozzle jams.

Light Weight

PolyWood™ is the first and so far the only 3D printable foam material. The density of PolyWood™ is on average 0.8 g/cm³ which is 35- 40% lighter than regular PLA.

Unique surface finish

With the foamed structure of PolyWood you can achieve amazing surface finish that minimises the visual layering due to the nature of FFF/FDM technology.


Glass Transition Temp
~ 60 °C

~ 0.8 g/cm3

1.75 mm or 2.85 mm

± 0.12 mm
120 Microns
(Typical~ ± 0.1 mm )

Temperature Range
210 – 240 °C

Recommended 3D printing temperature
200 – 235 °C (Diameter of 1.75 mm)
200 – 235 °C (Diameter of 2.85 mm)

Recommended 3D print speed
30 – 60 mm/s

Recommended Heated bed temperature
Not Required

Build platform
PolyWood works well with common build plate surfaces such as the blue tape, Kapton tape, glass, BuildTak

Certified with

PolyMaker PolyWood™

Print without the nozzle jams and hassles most wood filament brings

  Shop PolyWood™

Need Help?

Dont know where to start? Or which filament will suit your application?

We have a broad range of support options including Telephone Support

  Contact Us