Polymakers nano reinforced PolyMax PLA prints parts with superior mechanical strength compared to ABS!
PolyMax PLA parts and models print with exceptional detail and print quality.
Manufactured with Polymakers patented Jam-Free technology to ensure consistent extrusion and an easy printing experience.
9 x stronger than standard PLAand 20% stronger than ABS!
PolyMax PLA is manufactured with Polymakers patented nano reinforcing technology to provide enhanced mechanical strength.
PolyMax PLA is perfect for large prints thanks to its near-zero warping properties!
Manufactured with Polymakers8 steps of quality control
PolyMax PLA is a unique material developed with Polymakers patented nano reinforcement technology which dramatically enhances the materials mechanical properties. Thanks to its near-zero warping, mechanical properties and excellent print quality; PolyMax continues to be one of PolyMakers most popular filaments internationally and is widely used by prototype designers, manufacturers, schools / universities and everyday makers.
Nano-reinforced to provide superior mechanical properties compared to ABS
Parts printed with PolyMax PLA feature increased impact strength of up to 9 times that of regular PLA and 20% stronger than ABS. PolyMax is more durable and ductile, great for parts that may require some flex whilst keeping their toughness. Unlike parts printed with ABS and regular PLA, prints made with PolyMax can be bent or pulled without losing toughness or breaking.
Print Warp Free
Printing with PolyMax PLA, your parts will have better ductile strength compared to ABS with the benefits of less warping and under most printing conditions no warping! This allows you to print fantastic dimensionally accurate prints with the benefits of easy printing, great printer compatibility, no harmful odour and fantastic mechanical properties.
Fantastic print quality
Printing with PolyMax PLA offers makers with no compromises in printing quality. PolyMax PLA is produced with PolyMakers signature Jam-Free technology which minimises printing jams so you can print high quality parts / models with excellent strength whilst enjoying the ease of printing PLA
Glass Transition Temp~ 60 °C
Density1.17 – 1.24 g/cm3
Diameters1.75 mm or 2.85 mm
Tolerance± 0.05 mm50 Microns(Typical~ ± 0.02 mm )
Recommended 3D printing temperature190 – 220 °C (Diameter of 1.75mm)200 – 220 °C (Diameter of 2.85mm)
Recommended 3D print speed40 – 90 mm/s
Recommended heated bed temperatureNot Required (If equipped can be used up to 60°C)
Build platformThis product works well with common build plate surfaces such as the blue tape, Kapton tape, glass, buildtak etc.
Dont know where to start? Or which filament will suit your application?
We have a broad range of support options including Telephone Support